Planet WGSD-1022 Quick Installation Manual page 8

8-port 10/100mbps +2-port/gigabit managed ethernet switch

Hide thumbs Also See for WGSD-1022:

The previous command would apply the follow settings for the Switch.

IP: 192.168.1.100

Netmask: 255.255.255.0

5. Repeat Step 1 to check if the IP address is changed.

If the IP is successfully configured, the Switch will apply the new

IP address setting immediately. You can access the web interface of

WGSD-1022 through the new IP address.

If you do not familiar with console command or the

related parameter, enter "help" anytime in console to get

the help description.

Note

Figure 5-2 Set IP address screen

Table of Contents