Curtis G3 User Manual page 18

PROGRAMMING GUIDE
Coffee Pulse Brew (combo units only) - selects the Coffee Pulse Brew pattern (Pre-Infusion must be Off to
press the BREW button for which Pulse Brew needs to be changed. Press
(see guidelines below for information on various settings). Press
menu features.
When Coffee Pulse Brew is on, Pre-Infuson is disabled.
Setting Description
A Starts at beginning of brew cycle. 4 cycles of 10 seconds on and 5 seconds off, then on until end of brew cycle.
Starts towards end of brew cycle. 4 cycles of 5 seconds off and 4 cycles of 10 seconds on. Ends when brew cycle
B
ends.
C Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 10 seconds off, then on until end of brew cycle.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 20. Pulse on time and off
D
time are both adjustable from 5 to 150 seconds, in 5 second increments.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 8. Pulse on time and off
E
time are both adjustable from 1 to 150 seconds.
Pulse Brew Guidelines
• Filter pack type coffees typically extract better with the A and B pulse setting.
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
• Settings D and E are manual pulse counts.
Coffee Drip-Out (combo units only) - sets the Coffee Drip-Out time. Drip-out allows additional time for coffee
to drain from the brew basket before "Brewing" disappears from the display. Once accessed ( ), press the
BREW button for which the Drip-Out time needs to be changed (SHIFT+BREW selects half batch on some
models). Press or
display the subsequent menu features.
Safety Sw On/Off (combo units only) - turns the feature On and Off. Once accessed ( ), press
toggle between On and Off. Press
Temperature - adjusts the maximum tank water temperature. Once accessed ( ), press
increase or decrease the temperature. The range is 170ºF to 208ºF. Press
subsequent menu features.
Energy Save Mode - saves energy during periods when the brewer is not in use. When set to On, the brewer
automatically shuts off four hours after the last brew cycle. Press the ON/OFF button to return to normal
operation. When set to On-140ºF, the brewer shuts off four hours after the last brew cycle, but the water tank
temperature remains at 140ºF. Use the On-140ºF setting to reach brewing temperature faster after periods
of non-use. Once accessed ( ), press
display the subsequent menu features.
Brew Count Odom - When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press to go back without resetting or
Brew Count Total - when accessed ( ), displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds. Press
menu features.
to save. Press to display the subsequent menu features.
or to choose the desired setting. Press
reset. Press
to
or to select the desired setting
to save. Press to display the subsequent
to save. Press
to save. Press
to save. Press
to display the subsequent menu features.
to display the subsequent
PG4
),
to
or to
or to
to display the
to