Curtis G3 User Manual page 15

PROGRAMMING GUIDE
Curtis
Entering
Programming mode
Enter Code
- - - -
<Program Menus>
Select
Tea Recipes
Select
Tea by Volume
Select
Tea by Time
Select
Tea Dilut. Delay
Select
Tea Dilut. Volume
Select
Tea Dilut. Time
Select
Tea Dilut. Stir
Select
Tea Pulse Brew
Select
Tea Fast Brew
Select
1
Tea Half Batch
Select
Tea Drip-Out
Select
2
Sweetener Time
Select
2
Sweetener Delay
Select
2
Swtnr-Dil Pulse
Select
1
TEA/IC-1BATCH, TEA/IC-2BATCH, TEA/IC-3BATCH, TEA/IC-4BATCH, DUAL-DILUTION, TEA-SWEET, DUAL-SWEET
and COMBO models only.
2
TEA SWEET, DUAL-SWEET and COMBO-SWEET models only.
3
COMBO, COMBO/IC and COMBO-SWEET models only.
To enter programming mode:
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button. Continue to
hold down BREW button until
Enter Code appears.
Enter 4 digit code.
(factory default = 1-2-3-4)
IMPORTANT:
All programming functions are performed with the
three center buttons.
The symbols below the buttons are:
Scroll UP (1)
SELECT or ENTER to save new parameter (2)
Scroll DOWN (3)
Once you enter programming mode, press
through the various functions/features. Press
to the function/feature displayed. Then press
the various available settings. See Programming Options for detailed
descriptions.
3
Coffee by Volume
Select
3
Coffee by Time
Select
3
Coffee PreInfusn
Select
3
Coffee PulseBrew
Select
3
Coffee Drip-Out
Select
3
Safety SW On/Off
Select
Temperature
Select
Energy Save Mode
Select
or to scroll UP or DOWN
(Select) to make changes
or to scroll through
Brew Count Odom.
Select
Brew Count Total
Select
Cold Brew Lock
Select
Master Reset
Select
Service Call
Select
Access Code
Select
Banner Name
Select
P-Maintenance
Select
PG4
Beeper On/Off
Select
Quality Timer
Select
Displ. Brew Time
Select
Display Messages
Select
Model Select
Select
Exit
Select