General Lubrication; Steering Bearing; Wheel Bearing; Swingarm And Linkage - RIEJU MR 300 Owner's Manual

Maintenance
4
52
1
2
3
5

36. GENERAL LUBRICATION

Lubricate the parts shown, periodically or when
the vehicle is wet, especially after using high-
pressure water. Before lubricating each part,
clean the rusted parts with antioxidant and
remove any remaining grease, oil or dirt.
General lubrication
• Clutch lever (1).
• Front brake lever (2).
• Rear brake pedal (3).
• Rear brake pedal bearing (4).
• Gear shift lever (5).
Use a spray with a tube to lubricate with
pressure.
Use grease inside the throttle cable.
Chain lubrication
This is necessary after riding on wet ground
when the chain looks dry.
Its chain is made of seals, therefore you must
use a specific lubricant for this type of chain.
Your official RIEJU service centre will gladly
supply you with one.

37. STEERING BEARING

For this check, adjustment, or change, please
contact your official RIEJU service centre.

38. WHEEL BEARING

For this check, adjustment, or change, please
contact your official RIEJU service centre.

39. SWINGARM AND LINKAGE

For this check, adjustment, or change, please
contact your official RIEJU service centre.

40. REAR SUSPENSION

Shock absorber oil change
For this check, adjustment, or change, please
contact your official RIEJU service centre.