Installation Process Of Indoor Unit - Gree Versati III Series Owner's Manual

Air-to-water Heat Pump Split Versati

7.3 Installation process of indoor unit

Step1:Drilling hole on the wall in the following draw.
Wall
Step2:Install expansion bolts and forecasted pannel.
Step3: Attaching indoor unit to the wall.
• While lifting the indoor unit, at least two persons should be joined. Weight of the indoor unit is more than 50kg.
• The indoor unit must be installed vertically to the ground and fastened securely.
• Before commissioning, the dust-proof cap of the automatic relief valve must be loosened, other than entirely being
removed away, and it can be tightened in case that it leaks.
Wall
Wall
Note
NOTE
20
Wall
Support
Expansion
bolt X3
Wall
Thermal baffle
SPLIT TYPE