Table of Contents
Advertisement
I have an FTP or Web server on my network. How can I make it available to
users on the Internet?
For a Web server, enable port forwarding for port 8088 to the
server and set up the Web server to receive on that port, as well. (Configuring
the server to use a static
For an
server, enable port forwarding for port 21 to the
FTP
server. (Configuring the server to use a static
Connections
How many computers can be connected through the Modem?
The Modem is capable of 254 connections, but it is recommended to have no
more than 45 connections. As you increase the number of connections, you
decrease the available speed for each computer.
Security
What is the default username for the Modem?
The default username for the router is "admin" and the default password is
"password" (all lower case, no quotation marks). To activate the password to
protect the Modem, change the default password. Remote management will not
be available on the Modem until the default password is changed.
Does the Modem function as a firewall?
Yes. The Modem provides its security through the use of
as a physical barrier between your network and the Internet.
What is NAT and how does it protect my network?
(Network Address Translation) is a type of security that masks the private
NAT
addresses of the computers on your network with a single public
IP
With
, the private
NAT
transmitted over the Internet.
Which Virtual Private Networking (VPN) protocols are supported?
The Modem supports pass-through for
through is enabled by default and does not require any additional configuration.
DSL Modem User Manual
address is recommended.)
IP
address of the computers on your network is never
IP
PPTP
64
IP
address of the
IP
address is recommended.)
IP
firewall, which acts
NAT
,
, and
ec. The VPN pass-
L2TP
IPS
address of the
address.
IP
Advertisement
Table of Contents
