Table of Contents
Advertisement
If running Windows 98
s
Start, Run, enter
in the "Open" text box, then press
Ensure the text box at the top of the window contains the name of the Ethernet
adapter installed in the computer. If not, click on the down arrow next to the
text box. When the list appears, click on the proper Ethernet adapter.
In the fields below, the Ethernet adapter's various addresses appear. There
should be an entry for
Additionally, the "
(with "x" defining a range from 64 though 254).
If the Ethernet adapter is showing an incorrect
sets all values back to
seconds). The renewed IP address should be on the 192.168.1.x network.
If an error occurs, or the IP address renews with an address outside the
192.168.1.x network, contact the
If running Windows 98
s
settings. Select Start, Run, enter
IP
in the "Open" text box, then press OK. A "
ing cursor (prompt). Enter
at the cursor, then press Enter on the keyboard.
The
address of the Ethernet adapter should appear in the
IP
Ensure the
address in the 192.168.1.x network (with "x" defining a range
IP
from 64 though 254).
If the Ethernet adapter is showing an incorrect
at the cursor, then press Enter on the keyboard, which sets all values back to
0 (zero). Next, enter
at the cursor, then press Enter on the keyboard (this process may take a few
seconds). The renewed
If an error occurs, or the
192.168.1.x network, contact the
DSL Modem User Manual
or Me, check the computer's
SE
winipcfg
OK
address, Subnet Mask, and Default Gateway.
IP
Address" entry should be on the 192.168.1.x network
IP
(zero). Then, click Renew (this process may take a few
0
ISP
, Me, 2000, or
SE
CMD
ipconfig
ipconfig /release
ipconfig /renew
address should be on the 192.168.1.x network.
IP
address renews with an address outside the
IP
ISP
60
. The "
Configuration" window appears.
IP
address, click Release, which
IP
immediately.
, check the computer's
XP
" window appears, with a blink-
DOS
address, enter
IP
immediately
settings. Select
TCP/IP
TCP/
window.
DOS
Advertisement
Table of Contents
