Table of Contents
Advertisement
4. Enable Public/Private
Multiple Static IP Addresses. When selected, the Modem uses
addressing for the
IP
configured to the
private IP addressing. All computers using public
public
addresses statically assigned.
IP
5. Select the
DNS
address and, optionally, the secondary
boxes.
6. Select Dialout on-demand (optional). To have the Modem automatically
connect to the Internet whenever needed (when a Web browser is opened,
for example), activate "Dialout on-demand" by clicking in the appropriate
check box. When Dialout on-demand is activated, the user can also set the
Modem to disconnect from the Internet after a certain amount of idle time
(no Internet activity). To do this, enter the number of idle time minutes
(minimum 2 minutes) before disconnection occurs in the text box before
"Minutes."
7. Adjust
settings (optional). Enter the maximum transmission unit (
MTU
value (in bytes) in this text box. This value corresponds to the largest physical
packet size the network is allowed to transmit. Packets larger than this size are
divided into smaller packets. It is recommended to leave this value set at the
default (1492).
When finished in this screen, click Apply to activate any changes made.
Chapter 4 Configuring Advanced Settings
Addressing. This feature is used in conjunction with
IP
, allowing both public and private
LAN
simultaneously, while the
LAN
type. If static
DNS
DHCP
IP
address was selected, enter the primary
address in the appropriate text
DNS
25
for private
NAT
addressing to be
IP
server is reserved for
addresses must have the
DNS
)
MTU
Advertisement
Table of Contents
