Cisco NCS 4000 Series Unpacking, Moving, And Securing Manual page 15

Chapter 2 Unpacking the Chassis
Figure 2-2
Remove the accessories, corrugated accessory tray and the top foam cap.
Step 4
Leave the chassis on the pallet until you are ready to move and install the chassis in a rack.
Step 5
Be sure to save the packaging in case you need to return any of the components.
Tip
What to Do Next
After performing this task, go to the
Chassis in Original Packaging
"Removing the Chassis from the Pallet" section on page
Cisco Network Convergence System 4000 Series Unpacking, Moving, and Securing Guide
Unpacking the Chassis
2-4.
2-3