Table of Contents
Advertisement
TROUBLESHOOTING
Symptom
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Correct characters are not
• This unit can only display uppercase letters, numbers,
displayed.
• Depending on the display language you have selected
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
"PLEASE EJECT" appears.
16
ENGLISH
Remedy
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Clean the connectors. (Page 14)
Reset the unit. (Page 3)
and a limited number of symbols.
(page 5), some characters may not be displayed
correctly.
Connect the antenna firmly.
Press and hold
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 3).
Skip to another track or change the disc.
Reset the unit (page 3). If this does not solve the
problem, consult your nearest service center.
Symptom
Remedy
Playback order is not as
The playback order is determined by the order in which
intended.
files were recorded (disc) or the file name (USB).
Elapsed playing time is not
This depends on the recording process earlier (disc/USB).
correct.
"READING" keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the device (USB/iPod/
iPhone).
The iPod/iPhone does not
• Check the connection between this unit and iPod/iPhone.
turn on or does not work.
• Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when
This unit is still preparing the iPod/iPhone music list. It
you enter search mode by
may take some time to load, try again later.
pressing
.
"NO DISC"
Insert a playable disc into the loading slot.
"TOC ERROR"
Make sure the disc is clean and inserted properly.
"NA FILE"
Make sure the media (disc/USB) contain supported audio
files. (Page 14)
"COPY PRO"
A copy-protected file is played (disc/USB).
"NO DEVICE"
Connect a device (USB), and change the source to USB
again.
"NO MUSIC"
Connect a device (USB) that contains playable audio files.
"iPod ERROR"
• Reconnect the iPod.
• Reset the iPod.
Hide quick links:
Advertisement
Table of Contents
