Audio Settings; Select The Equalizer - Kenwood KDC-230UI Instruction Manual

AUDIO SETTINGS

Select the equalizer

(only for
Press repeatedly to select a preset equalizer (which is suitable to
the music genre) directly.
Preset equalizer: [DRIVE EQ]/[TOP40]/[POWERFUL]/[ROCK]/[POPS]/[EASY]/[JAZZ]/
[NATURAL]/[USER]
• Select [USER] to use the settings made in [EQ PRO].
• [DRIVE EQ] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
Other settings
1
Press AUD to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
(or using the remote control)
1
Press AUD to enter [AUDIO CONTROL].
2 Press J/K to select an item, then press ENT IW.
To return to the previous setting item, press
)
.
[AUDIO CONTROL]
[SUB-W LEVEL] [–15] to [+15] ([0]) Adjusts the subwoofer output level.
[BASS LEVEL] [–8] to [+8]
[MID LEVEL] [–8] to [+8]
[TRE LEVEL] [–8] to [+8]
[EQ PRO] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
[BASS [BASS CTR FRQ]
ADJUST]
[BASS LEVEL]
[BASS Q FACTOR]
[BASS EXTEND]
Default:
/
: [100]/[+8]/[1.00]/[ON]
[MID ADJUST] [MID CTR FRQ]
[MID LEVEL]
[MID Q FACTOR]
Default:
/
: [2.5KHZ]/[+2]/[1.00]
Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want
to adjust.)
Default:
/ /
[+1]/[+1]
: [+8]/[+2]/[+3]
[60]/[80]/[100]/[200]: Selects the center frequency.
[–8] to [+8]: Adjusts the level.
[1.00]/[1.25]/[1.50]/[2.00]: Adjusts the quality factor.
[ON]: Turns on the extended bass. ; [OFF]: Cancels.
/ : [100]/[+2]/[1.00]/[OFF]
[0.5KHZ]/[1.0KHZ]/[1.5KHZ]/[2.5KHZ]: Selects
the center frequency.
[–8] to [+8]: Adjusts the level.
[0.75]/[1.00]/[1.25]: Adjusts the quality factor.
/ : [1.0KHZ]/[+1]/[1.00]
ENGLISH
Default: [XX]
: [+2]/
11