Wiring Connection - Kenwood KDC-230UI Instruction Manual

INSTALLATION/CONNECTION

Wiring connection

Output terminals
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse
box
Battery
To the metallic body or chassis of the car
Antenna terminal
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
IMPORTANT
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to
the car's chassis to avoid damaging the unit.
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
(12 V 350 mA)
Light blue/yellow
(Steering remote control wire)
To the terminal that is grounded when the
telephone rings or during conversation (Page 17)
(To connect the Kenwood navigation system, refer
your navigation manual)
To the power control terminal when using the
optional power amplifier or to the antenna control
terminal in the vehicle
To the steering wheel remote control adapter
ENGLISH
19