Aux; Start Listening; Set The Aux Name - Kenwood KDC-230UI Instruction Manual

CD/USB/iPod/ANDROID
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
[USB]
[MUSIC DRIVE] [DRIVE CHANGE]: The next drive ([DRIVE 1] to [DRIVE 5]) is selected
automatically and playback starts.
Repeat steps 1 to 3 to select the following drives.
[SKIP SEARCH] (For
[0.5%]/[1%]/[5%]/[10%]: While listening to iPod USB source, selects the
skip search ratio over the total files.
10
ENGLISH
.
)

AUX

Preparation:
• Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 5)

Start listening

1 Connect a portable audio player (commercially available).
Auxiliary input jack
Default: [XX]
3.5 mm stereo mini plug with "L" shaped
connector (commercially available)
Press B SRC repeatedly to select AUX.
2
3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [AUX NAME SET], then press the knob.
4
Turn the volume knob to select an item, then press the knob.
[AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]
5 Press and hold
To return to the previous setting item, press
Portable audio player
to exit.
.