Audio Settings - Kenwood KDC-X7100DAB Instruction Manual

AUDIO SETTINGS

While listening to any source...
1
Press AUDIO to enter [AUDIO CONTROL] directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer
output level.
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are
preset into each selection.
62.5HZ LEVEL LEVEL
BASS
EXTEND
LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to
100 HZ/160 HZ/250 HZ/
memorize for each source. (Before making an adjustment,
400 HZ/630 HZ/1 KHZ/
select the source you want to adjust.)
1.6KHZ/2.5KHZ/4 KHZ/
6.3KHZ/10 KHZ/16 KHZ
LEVEL
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/
USER: Selects a preset equalizer suitable to the music genre.
(Select [USER] to use the settings made in [MANUAL EQ].)
BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects your
preferred bass boost level. ; OFF: Cancels.
.
Default: XX
LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts
the level to memorize for each source. (Before
making an adjustment, select the source you
want to adjust.)
ON: Turns on the extended bass. ; OFF: Cancels.
LEVEL1/LEVEL2: Selects your preferred low and high frequencies boost
LOUDNESS
to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
(Not applicable if 3-way crossover is selected.)
FADER
REAR 15 to FRONT15 (0): Adjusts the rear and front speaker output
balance.
LEFT 15 to RIGHT15 (0): Adjusts the left and right speaker output
BALANCE
balance.
VOLUME OFFSET LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume level of
each source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND (Not applicable for TUNER source, DIGITAL AUDIO source and AUX source.)
RECONSTRA ON: Creates realistic sound by compensating the high-frequency
(Sound components and restoring the rise-time of the waveform that are lost
reconstruction) in audio data compression. ; OFF: Cancels.
SPACE (Not applicable for TUNER source and DIGITAL AUDIO source.)
ENHANCER SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
SOUND REALIZER LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
STAGE EQ LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
the speakers. ; OFF: Cancels.
DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
Depending on the crossover type you have selected ( 5), 2-way
SPEAKER SIZE
crossover or 3-way crossover setting items will be shown. ( 20, 21)
X'OVER
By default, 2-way crossover type is selected.
DTA SETTINGS
For settings, 21, 22, Digital Time Alignment settings.
CAR SETTINGS
• [SUB-W LEVEL] is selectable only if [SUBWOOFER SET] is set to [ON].
19
ENGLISH