Audio Settings - Kenwood DPX520BT Instruction Manual

BLUETOOTH®
Internet radio via Bluetooth
Listen to Pandora
Preparation:
Select [ON] for [PANDORA SRC]. ( 5)
You can listen to Pandora on your smart phone
(Android OS) through Bluetooth on this unit.
1
Open the Pandora application on your device.
2
Connect your Bluetooth audio player via
Bluetooth connection. ( 12)
3
Press repeatedly to select PANDORA.
The source switches and broadcast starts
automatically.
You can operate Pandora in the same way as Pandora
for iPod/iPhone. ( 10)
Listen to iHeartRadio
Preparation:
Select [ON] for [IHEART SRC]. ( 5)
You can listen to iHeartRadio on your smart phone
(Android OS) through Bluetooth on this unit.
1
Open the iHeart Link application on your smart
phone.
2
Connect your smart phone via Bluetooth
connection. ( 12)
3
Press repeatedly to select IHEARTRADIO.
The source switches and broadcast starts
automatically.
You can operate iHeartRadio in the same way as
iHeartRadio for iPod/iPhone. ( 11)
18

AUDIO SETTINGS

While listening to any source...
1
Press AUDIO to enter [AUDIO CONTROL].
2
Turn the volume knob to make a selection (see the following table), then press the
knob.
3 2
Repeat step until the desired item is selected or activated.
4 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to make a selection, then press
2
To return to the previous setting item, press
SUB-W LEVEL –15 to +15 (0)
BASS LEVEL –8 to +8 (+6)
MID LEVEL –8 to +8 (+5)
TRE LEVEL –8 to +8 (0)
EQ PRO
BASS ADJUST BASS CTR FRQ
BASS LEVEL
BASS Q FACTOR
BASS EXTEND
MID ADJUST MID CTR FRQ
MID LEVEL
MID Q FACTOR
TRE ADJUST TRE CTR FRQ
TRE LEVEL
.
.
Adjusts the subwoofer output level.
Adjusts the level to memorize for each source. (Before making an adjustment,
select the source you want to adjust.)
60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency.
–8 to +8 (+6): Adjusts the level.
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
ON: Turns on the extended bass. ; OFF: Cancels.
0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.
–8 to +8 (+5): Adjusts the level.
0.75/ 1.00/ 1.25: Adjusts the quality factor.
10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency.
–8 to +8 (0): Adjusts the level.
Default: XX