Joy-it STROM PI 2 Manual page 2

Therefore, the StromPi 2 board provides now up to 3 A current to supply
greater projects with enough power. Moerover, the reset-function for the
Raspberry Pi is now integrated which extends the USV-function of the
StromPi practically.
Through the new super-flat construction and connection, the StromPi 2 fits
in many cases and new application areas. The StromPi 2 allows to connect
your Raspberry Pi with an arbitary voltage source with a voltage range from
6 to 61 V so that you have new possibilities to applicate the Raspberry Pi (car,
ship, truck, industrial plant etc.). Furthermore, the Raspberry Pi
receives optionally an upgrade of the USB outputs to a high power USB
output to operate power-intensive devices for examples USB-hard disks
without any restrictions.
The integrated USV-function enables the safeguarding of critical
applications against power failures. Via software for the Raspberry Pi, it is
possible to monitor the USV-function and to mail different reports via e-mail
in case of a failure. Due to the used efficient solution for switching
regulators, it allows the Raspberry Pi to operate as a portable device via a
battery.
useful expansion of the USV-mode: After the Raspberry is shut down at a
power failure by the StromPi, the new reset- function restarts the Raspberry
Pi automatically if the main voltage source is available again.
intended use: The expansion board to connect a compatible single board
computer (e.g. Raspberry Pi)with a voltage source from 6 to 61 V so it can
operate with this power.
warning: At a heavy load, the StromPi can heat up. Do not touch the
!
board during use to prevent burn injuries - enable a solid air
supply to enclude the overheating of the device.