Advertisement
RB-MOTO2 (STEP YOUR PI)
Raspberry Pi stepper motor control
1. GENERAL INFORMATION
Dear costumer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
Advertisement
Table of Contents
Related Manuals for Joy-it RB-MOTO2
Summary of Contents for Joy-it RB-MOTO2
- Page 1 RB-MOTO2 (STEP YOUR PI) Raspberry Pi stepper motor control 1. GENERAL INFORMATION Dear costumer, thank you very much for choosing our product. In following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
- Page 2 "jumpers": However, if you want to supply an external power source, you can install it on the two right pins, marked on the following picture: www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 3 2. ASSEMBLY AND INSTALLATION Stepper motors are controlled by alternately supplying the individual steps of the motor with power. The required pins for the steps of the individual motors is shown in the following wiring overview: www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 4 Seq[j][1], Seq[j][2], Seq[j][3]) time.sleep(delay) # 20 slow steps forward delay = steps = forward(int(delay) / 1000.0, int(steps)) # 200 quick steps backwards delay = steps = www.joy-it.net backwards(int(delay) / 1000.0, int(steps)) Pascalstr. 8 47506 Neukirchen-Vluyn...
- Page 5 SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germa- Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by e-mail at Service@joy-it.net or by telephone. Information on packaging: If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
Need help?
Do you have a question about the RB-MOTO2 and is the answer not in the manual?
Questions and answers