Bracket Installation - Nakanishi iSpeed3 Operation Manual

8 . BRACKET INSTALLATION

CAUTION
If there is a possibility for the Control Unit to fall from its intended location. Be sure to install the
provided Mounting Brackets for safety.
Mounting Brackets ( 2 pcs.) and Plate Nuts ( 4 pcs.) are provided with the iSpeed 3 System.
The Mounting Bracket can be installed on the bottom, on the top surface and on the front side of the Control
Unit.
After installing the Mounting Bracket you can use the Screw cutouts to mount the Control Unit.
Insert the Plate Nut into the groove portion of the front side of the Control Unit.
Attach the Mounting Brackets ( 2 pcs.) using the provided Screws ( 4 pcs.) and Plate Nuts ( 4 pcs.).
8 - 1 Bottom Mounting
Fig. 8
8 - 2 Top surface Mounting
8 - 3 Front side Mounting
Plate Nut
Fig. 9
Bracket
Fig. 11
Bracket
Fig. 13
Bracket
Fig. 10 Bottom Mounting
Fig. 12 Top Surface Mounting
Fig. 14 Front Side Mounting
196
176
196
176
38.2
196
176
21.4
10