Important Instructions And Warnings-Electric Device - Nakanishi iSpeed3 Operation Manual

IMPORTANT INSTRUCTIONS AND WARNINGS -Electric Device
WARNING!
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electrical
shock and personal injury.
Read all these instructions before operating this product and save these instructions.
A. GROUNDING INSTRUCTIONS
In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current
1.
to reduce the risk of electric shock. This tool is equipped with an electric cord with grounding conductor and a
grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
Do not modify the plug provided if does not fit the outlet. A qualified electrician must install the proper outlet.
2.
Improper connection of the grounding conductor can result in electric shock. The grounding conductor has an outer
3.
insulation that is green with or without yellow stripes.
If repair or replacement of the electric cord or plug is necessary, do not connect the grounding conductor
to a live terminal.
Check with a qualified electrician or service person if the grounding instructions are not completely understood,
4.
or if in doubt as to whether the tool is properly grounded.
Use only 3 -wire extension cords that have 3 -prong grounding plugs and 3 -pole receptacles that accept the power
5.
cord's plug.
6. Repair or replace a damaged or worn cord immediately.
This tool must be used on a circuit that has an outlet that looks like the one illustrated in sketch A in figure
7.
(see below) .
Install an over current protective device with a maximum of 10 Amps on the control units main power circuit.
8.
9. USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop the line voltage resulting in loss of power and overheating.
GROUNDING PIN
1
Grounding Method
COVER GROUND
OUTLET BOX
A
GROUNDING
CONTACT