7 . CHANGING FUSES
WARNING
・
Before removing fuses make sure that the Main Power Switch ⓖ is turned OFF and
the power cord is disconnected from the power supply.
・
Make sure and use only the properly rated and type of fuse.
・
Failure to use the proper type and rated fuse will result in fire, injury, electric shock
and/or product damage.
Push on the clips on the top and bottom of the fuse holder and remove the fuse folder and fuses.
Remove the bad fuse or fuses and replace with the proper type and rating of fuse as listed below and as
determined by the input voltage being used.
Specified fuse : T 4 . 0 AH ( 100 V, 120 V) Part No. S 505 - 4 -R (Cooper Bussmann Inc.)
Replace the fuse holder containing the fuses into the Fuse Inlet Box and make sure it snaps in place.
9
T 2 . 0 AH ( 200 V, 230 V) Part No. S 505 - 2 -R (Cooper Bussmann Inc.)
Cap
Fig. 7