Table of Contents
Advertisement
Fig. 2:
Device in as-delivered state: pulling off the
attachment
Fig. 3:
Connecting the cables
Product manual 2CKA001473B8291
Connection, installation / mounting
–
If the device is in its as-delivered
state, pull the attachment off the
flush-mounted insert with your hands.
–
Pull the attachment off only with your
hands. Do not lever parts off with
screwdrivers or similar hard objects.
This will damage the device.
–
When pulling off, first the resistance
of the plastic clamps must be
overcome.
1. Connect the cables to the flush-
mounted insert.
–
For the connection assignment,
see chapter see chapter 6.3
"Electrical connection" on page
15.
│14
Advertisement
Table of Contents
