Block Programming - Busch-Jaeger 1098 U-101 Product Manual

8.5.2

Block programming

Fig. 11: Menu item – Block
Button Display
Starting times
BLOCK
Comfort mode /
07:00
7:30
Night mode /
22:00
22:30
Comfort mode /
08:00
8:30
Night mode /
22:00
22:30
Starting times
Product manual 2CKA001473B8291
Entry / Comments
– Press the menu button for 2 seconds to switch to the setting
mode.
– Press the OK button to select menu item "Block programming".
The weekdays flash.
– Press the OK button again.
The preset starting time for "Comfort mode" flashes (Mon - Fri).
– Set the desired starting time via the arrow buttons.
In this example the starting time has been set at 7:30.
– Confirm your entry with the "OK" button.
You simultaneously switch to the next menu item "Night mode" (Mon -
Fri).
The preset starting time flashes.
– Set the desired starting time via the arrow buttons.
In this example the starting time has been set at 22:30.
– Press the OK button again.
You simultaneously switch to the next menu item "Comfort mode"
(Sat - Sun).
The preset starting time flashes.
– Set the desired switch-on time via the arrow buttons.
In this example the switch-on time has been set at 8:30.
– Confirm your entry with the "OK" button.
You simultaneously switch to the next menu item "Night mode" (Sat -
Sun).
The preset starting time flashes.
– Set the desired switch-off time via the arrow buttons.
In this example the starting time has been set at 22:30.
– Confirm your entry with the "OK" button.
The starting times are now set.
Operation
│27