nedis HPBT1050BK Quick Start Manual page 6

Pairing the earphones to a Bluetooth audio
source
1. Take the earphones out of the charging case. The earphones
switch on automatically.
4 Press and hold both earphone buttons A
seconds to switch the earphones on manually.
2. The status indicator LED A
pairing mode is active.
3. Enable bluetooth on the device you want to pair the
earphones with.
4. Select "HPBT1050BK" from the list of available Bluetooth
devices on your device.
Charging the product (image B)
1. Plug the micro USB cable A
8
A
.
2. Plug the other end of A
adapter.
3. Plug the power adapter into a power outlet.
4. The charging indicator LEDs A
progress of the battery.
5. Place the earphones into the respective slots A
close the lid A
5
6. A
on the earphones lights up red.
5
7. A
switches off when the earphones are fully charged.
4
The earphones and the charging case can charge
simultaneously.
Switching on the product
• Press and hold A
product on or off.
Making phone calls
With the earphones connected to a mobile phone via
Bluetooth, phone calls will automatically be redirected to the
earphones.
• To answer an incoming call, press A
• To reject an incoming call, press and hold A
2 seconds.
• To end a call, press A
Controlling the music
6
• Press A
• Triple press A
• Triple press A
q
1
to charge the earphones.
6
and A
6
or A
7
or A
to play or pause the music.
7
to increase the volume.
6
to decrease the volume.
5
starts blinking to indicate
q
into the micro USB port
into a computer or power
4
indicate the charging
7
for 3 seconds to switch the
6
or A
7
.
6
6 7
A
for 5
2 9
A
7
.
6 7
or A
and
for