Fan Failed - Agilent Technologies 1200 Series Reference Manual
Standard and preparative autosamplers
Hide thumbs
Also See for 1200 Series:
- Reference manual (256 pages) ,
- User manual (184 pages) ,
- Manual (150 pages)
Table of Contents
Advertisement
Fan Failed
The cooling fan in the autosampler has failed.
The hall sensor on the fan shaft is used by the ASM board to monitor the fan
speed. If the fan speed falls below 2 revolutions/second for longer than
5 seconds, the error message is generated.
Probable Causes
• Fan cable disconnected.
• Defective fan.
• Defective ASM board.
Suggested Actions
✔
✔
✔
Agilent 1200 Series Autosampler Reference Manual
Ensure the fan is connected correctly.
Exchange fan.
Exchange the ASM board.
Troubleshooting and Test Functions
3
67
Advertisement
Table of Contents
Troubleshooting
