Standard Mode Configuration; Extended Mode Configuration - ADC Campus RS Destop Unit User Manual

Installing and Configuring the Line Unit

Standard Mode Configuration

This section continues from
HDSL transmission rate.
1 If the Operating Mode is set to STANDARD, skip to
press Enter.
2 Press Next until STANDARD displays, then press Enter. The LCD
displays OPERATING MODE.
3 Press Next until HDSL RATE displays, then press Enter.
4 Press Next until the desired HDSL transmission rate displays, then
press Enter.
To continue setting up the system, proceed to the
Mode" section.

Extended Mode Configuration

This section continues from
transmission rate.
1 If the Operating Mode is set to EXTENDED, skip to
press Enter.
2 Press Next until EXTENDED displays, then press Enter. The LCD
displays OPERATING MODE.
3 Press Next until LOOP MODE displays, then press Enter.
4 Press Next to display either 2 LOOPS or 1 LOOP, then press Enter to
select the option displayed. The LCD displays LOOP MODE.
5 Press Next until HDSL RATE displays, then press Enter.
6 Press Next until the desired HDSL transmission rate displays, then
press Enter.
To continue setting up the system, proceed to the
Mode" section.
14
Step 4 in the previous section to set a standard
Step 4 on page 13
May 29, 2002
Step 3. Otherwise,
"Set the HDSL Transceiver
to set an extended HDSL
Step 3. Otherwise,
"Set the HDSL Transceiver
Campus-RS Line Unit User Manual