Parkside PMML 5 A1 Operation And Safety Notes page 38

directly into the laser. The laser can
cause serious eye damage.
Use the laser marking function to
align pictures, cupboards, and other
things, vertically or horizontally.
Depending up on room environment
light, up to 5 m maximum laser line
can be projected.
Slide the function switch
position "LASER". A laser line is
projected.
Horizontal laser line
1. Hold the product horizontally to a
soft surfaced wall (example: Wooden
wall). To do this, direct the product
so that the air bubble in the vial
lies between the two marked lines.
2. Slide both the stud buttons
firmly downwards. The nails lightly
penetrate on the soft surfaced wall to
prevent the multi-detector from falling
(see Fig. H)
Attention: Exercise care with the
studs. These are sharp and can
cause injury (see Fig. F). Do not use
38 GB/IE/NI
to the
9
8
,
5 11