Continuous Distance Measurement Mode - Parkside PMML 5 A1 Operation And Safety Notes

2. Briefly press the READ button
The laser beam will turn on. The laser
on mode will be indicated on the LC
display
.
26
Note: If the LC display
off under Distance mode, the READ
button
turn on the laser beam.
3. Briefly press the READ button
again. The measured distance will be
appeared on the display
Note:
- New distance measurement can be
done by repeating step 2 to step 3.
- Measured values can be cleared by
pressing MODE button
Continuous distance
measurement mode
For continuous distance measurement,
follow the step 1 & step 2 of single distance
measurement mode to turn on the laser
beam. Once the laser beam is turned on,
hold the READ button
and slowly move the product over the
by a flashing laser symbol
2
has to be pressed twice to
6
is turned
2
.
2
.
4
pressed down
6
GB/IE/NI
.
6
6
25