Table of Contents
Advertisement
D X-3 001 Se ri es Ind ustr ia l C lou d Ro u ter
Notice
If it is found that the static IP address is configured from DIACom, the IP address of the local IP
address in the bottom right corner will be different from the original setting. Please change according
to the following settings.
1.
2.
3.
_4
4.
4 - 8
Go to Network and Sharing Center and click on the DIACom Ethernet Adapter for your network
connection.
Right-click, then click Properties.
Click the Networking tab. Under This connection uses the following items, click either Internet
Protocol Version 4 (TCP/IPv4)。
Set the IP address of the local computer manually. However, you'll need to make sure there are
no IP conflicts.
Advertisement
Table of Contents
