Table of Contents
Advertisement
Working Mode
Select the working mode for the current active serial port.
Transparent mode: This mode is suitable for uploading and downloading
data remotely via the serial port.
Slave mode: This mode is suitable for the PLC to perform the read/ write
tasks on the open register of the Router.
Serial Server – TCP Client: This mode is suitable for the router connect to
serial server by TCP protocol as a client.
Serial Server – UDP Client: This mode is suitable for the router connect to
serial server by UDP protocol as a client.
Close: Disable this functionality.
Baud Rate
Parameters of
Set up the baud rate for the serial port. Options are
COM
2400, 4800, 9600, 19200, 38400, 57600 and 115200.
Data Bits
Description
Cha p ter 3 In tr od ucti on to F unc tio ns
Default
Close
9600
_3
3 - 2 1
Advertisement
Table of Contents
