Delta DX-3001 Series User Manual page 73

D X-3 001 Se ri es Ind ustr ia l C lou d Ro u ter
Set up the network protocol for Secure Tunnel. Options are TCP and UDP.
Suggest use TCP when the network packet loss is serious. Only TCP is
available when proxy function was enable. User can change it yet after device
has been bind the cloud account. Please disable the service first and then you
can change the protocol, and remember to enable the service again.
Cloud IP Range
Display the Cloud IP Range. The Cloud IP Range is depended on the secure
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel
Network.
_3
Cloud Netmask
Display the Cloud Netmask. The Cloud Netmask is depended on the secure
tunnel setting. For the secure tunnel setting, please refer to 5.2.5 Tunnel
Network.
Device IP
User can assign an IP address manually; remember that IP address should be
the same subnet as the secure tunnel setting. For the secure tunnel setting,
please refer to 5.2.5 Tunnel Network.
Notice
 Users can log-in to http://www.DIACloudSolutions.com/ and register for a
DIACloud account.
 In rare case, you can't access the web because the computer did not refresh the IP
and DNS after the activation, please re-plug the cable to resolve the issue.
3 - 4 8
Description Default
UDP
N/A
N/A
N/A