Table of Contents
Advertisement
Force transmit
Set up the how long it will wait before it send packets
mandatory. Range from 0 to 65536 millisecond. 0
means never send packets mandatory.
Destination IP address and port
Set the IP segment and port of the serial server. Up to
4 segments can be configured and there are at most
99 addresses in each segment. Port defaults are 6001
~ 6004 and configurable.
Local listen port
Set up the local port.
Serial Server –
Packing length
UDP Client
Set up the threshold for sending packets. Range from
0 to 1024 bytes. 0 means it is immediately sent once
data coming.
Force transmit
Set up the how long it will wait before it send packets
mandatory. Range from 0 to 65536 millisecond. 0
means never send packets mandatory.
3.4.4
RS485
RS485 (Recommended Standard - 485) is a telecommunication standard for binary serial communications between
devices. You can set up the configurations for RS485, including Baud Rate, Data Bits, Stop Bits, Parity Bits, and many
more.
Description
Cha p ter 3 In tr od ucti on to F unc tio ns
Default
0
15000
0
0
_3
3 - 2 3
Advertisement
Table of Contents
