Preparing The Plow For Operation - SaMASZ City 150 Operating Manual

5.5. Preparing the plow for operation

ATTENTION:
During storing of the machines in company SaMASZ the cylinders are
protected by special grease in order to secure them against weather which may
cause their premature wear. Before starting the operation excess grease should
be removed from the cylinders.
After correctly mounting the plow on the tractor it should be inspected and it should be
determined if the plow has worn blade inserts, bumpers or loose bolts. If necessary replace worn
elements and tighten the bolts. If the plow is ready for use it should be placed in the desired position
and plowing can be started. Fig. 16 and Fig. 17 presents basic operating positions of the plow.
While working on public roads turn on the marker lights.
a)
c)
Fig. 16. Basic operating positions of the plow: a) plowing the snow right, b) plowing the snow left, c) moving
d)
Fig. 17. Basic operating positions of the plow: e) – moving the snow, d) – plowing the snow to both sides
Operating manual
the snow
simultaneously
Tractor mounted snow plow
City, City K, City Up
b)
e)
- 14 -