1. Manuals
  2. Brands
  3. SaMASZ Manuals
  4. Snow Blower
  5. SnowPick 91
  6. Operator's manual

SaMASZ SnowPick 91 Operator's Manual

Truck snow plow
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
TRUCK SNOW PLOW:
SnowPick 91
SnowPick 96
SnowPick 102
SnowPick 114
Translation of original instructions
SaMASZ Sp. z o.o.
Poland, 16-060 Zabłudów, ul. Trawiasta 1
Established – 1984
NIP PL-966-159-29-76
tel. (+48) (85) 664 70 31
fax (+48) (85) 664 70 41
e-mail: samasz@samasz.pl
EDITION NO. 0
www.samasz.pl
IN1535USA000
2017.11.22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SnowPick 91 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SaMASZ SnowPick 91

Summary of Contents for SaMASZ SnowPick 91

  • Page 1 SaMASZ Sp. z o.o. Poland, 16-060 Zabłudów, ul. Trawiasta 1 Established – 1984 NIP PL-966-159-29-76 tel. (+48) (85) 664 70 31 fax (+48) (85) 664 70 41 e-mail: samasz@samasz.pl www.samasz.pl OPERATOR'S MANUAL TRUCK SNOW PLOW: SnowPick 91 SnowPick 96 SnowPick 102...

  • Page 2: Snowpick

    NOTE: Keep this manual for further reference! We congratulate you on the purchase of your new SaMASZ snow plow and wish you much pleasure and the very best experience resulting from its operation. Prepared by: mgr inż. Marcin Bujnowski...

  • Page 3: Table Of Contents

    Truck Snow Plow Operator's Manual SnowPick Contents page …………………………………………………………………………………………………………………………………….. IDENTIFYING THE MACHINE ........................... 2 INTRODUCTION ..............................3 TECHNICAL DESCRIPTION ..........................3 3.1. Intended use ................................3 3.2. Technical data ................................. 4 3.3. Construction ................................4 3.4. Standard equipment ..............................6 3.5.

  • Page 4: Identifying The Machine

    Truck Snow Plow Operator's Manual SnowPick 1. IDENTIFYING THE MACHINE Each snow plow can be easily identified thanks to data plate mounted firmly on the linkage body or shield as shown below in Fig. 1. Fig. 1. Data plate location Data plate includes: - name and adress of the manufacturer, - model year,...

  • Page 5: Introduction

    Truck Snow Plow Operator's Manual SnowPick 2. INTRODUCTION This operator’s manual should be considered as the machine's basic equipment. If the machine is handed over to another user, it should be serviceable, and include this operator's manual, EC declaration of conformity and its required basic equipment. This operator’s manual is essential for safe and proper use of this machine and should be read before anyone operates this machine.

  • Page 6: Technical Data

    Truck Snow Plow Operator's Manual SnowPick 3.2. Technical data General specification of SnowPick mowers Tab. 1. Plow type SnowPick 91 SnowPick 96 SnowPick 102 SnowPick 114 Parameter Working width [cm / ft in] Steering angle = 0° 231 / 7′ 6″...
  • Page 7 Truck Snow Plow Operator's Manual SnowPick Fig. 2. Construction of SnowPick plow 1 – Shield 9 – Lamp 2 – Blade (rubber / polyurethane / steel) 10 – Toppings 3 – Blade turning cylinders 11 – Markers 4 – Springs 12 –...

  • Page 8: Standard Equipment

    Truck Snow Plow Operator's Manual SnowPick Fig. 3. Hydraulic diagram A – Left turn cylinder, B – Right turn cylinder, C – Lifting cylinder, D – Falling speed adjustment valve (clockwise direction = slower) 3.4. Standard equipment warranty card, operator's manual with catalogue of spare parts and declaration of conformity, rubber, polyurethane or Hardox steel clearing bar, control panel, shield hydraulic control,...

  • Page 9: Optional Equipment

    NOTE The SaMASZ co. does not bear any responsibility for damages and defects caused as a result of applying non-original parts and equipment. 4. SAFETY PRECAUTIONS...

  • Page 10: Qualifications Of Operator

    Truck Snow Plow Operator's Manual SnowPick Replace any damaged hydraulic hoses and other hydraulic parts. Use only original spare parts which can be ordered at our store or at your dealer. While performing any repair, maintenance and adjustment works always wear safety gloves. Do not leave the vehicle with mounted plow on slopes.
  • Page 11 Truck Snow Plow Operator's Manual SnowPick WARNING! When transported the snow plow should be secured properly so as to prevent its shifting. When placing the snow plow on a transport vehicle, it should be lifted up by transport holders are marked with special labels. When lifting use lifting devices with a load capacity not less than snow plow’s overall weight.

  • Page 12: Residual Risk

    4.5. Residual risk Despite the fact that SaMASZ Białystok – the manufacturer of the machinery has taken great care in the design and manufacturing of the machinery, certain risks during machinery operation and maintenance are unavoidable.

  • Page 13: Safety Labels And Their Meaning

    Truck Snow Plow Operator's Manual SnowPick NOTE Present residual risk results mainly from erroneous actions of the snow plow’s operator and failure to follow the instruction manual. NOTE When describing residual risk, the snow plow shall be considered a machine, which until the moment of production launching had been designed and manufactured in accordance with the state of the art at the day of the manufacture.
  • Page 14 Truck Snow Plow Operator's Manual SnowPick N-206 Wear protective gloves N-206 LOGO N-40 N-11 LOGO N-206 N-11 Fig. 6. Label locations - 12 -...

  • Page 15: Operating Plow

    Truck Snow Plow Operator's Manual SnowPick 5. OPERATING PLOW 5.1. Mounting plow on vehicle CAUTION! Exercise particular caution when mounting plow on vehicle. During mounting make sure there are no people between the plow and the vehicle. 5.1.1. Conditions for mounting SnowPick plow on vehicle SnowPick plows are designed as front plows with various hitch options according to customer's individual needs.
  • Page 16 Truck Snow Plow Operator's Manual SnowPick To mount the plow on the vehicle do the following: lift the hitch on a required assembling height using support foot (if no range is available (Fig. 11) place mounting point for foot bolt in the other hole (Fig. 10), and set hitch fins (Fig. 7 – A) so they are vertical in relation to the ground using chain (Fig.
  • Page 17 Truck Snow Plow Operator's Manual SnowPick min. ¼" (6 mm) Fig. 12. Plow positions – position: up – down with expected suspension height NOTE The manufacturer shall not bear any responsibility for damages of the plow resulting from it improper mounting on the vehicle. Make sure to periodically inspect the plow for its correct mounting.

  • Page 18: Increasing Load Of Vehicle's Rear Axle

    Truck Snow Plow Operator's Manual SnowPick 5.2. Increasing load of vehicle's rear axle After mounting the plow on the vehicle it is recommended to apply increased load on the vehicle's rear axle. Amount of required additional load can be calculated from the below formula: Fig.

  • Page 19: Plow Control

    Truck Snow Plow Operator's Manual SnowPick 5.4. Plow control Plow's independent hydraulic assembly comprises electric pump and three control cylinders. The lifting assembly has chain allowing for lifting a wing when driving onto an obstacle. Plow is controlled by means of control panel (Fig. 16). The plow's desired position (working or transport) can be set using corresponding buttons.
  • Page 20 Truck Snow Plow Operator's Manual SnowPick Instructions for controller operation: 1. The controller starts automatically after turning the ignition key. 2. To move the shield UP/LEFT/RIGHT push button respectively (also it can be pushed quickly twice). 3. To LOWER shield push hold button...

  • Page 21: Setting Run Time For Hydraulics

    Truck Snow Plow Operator's Manual SnowPick 5.4. Setting run time for hydraulics To change times do the following: Turn the ignition key off AUTO Push on the panel and turn the ignition key on, LED A (Fig. 16) turns red - wait until turns green. Blinking LED C (Fig.

  • Page 22: Transport And Parking Position

    Truck Snow Plow Operator's Manual SnowPick transverse ground following, enabling to pass through surfaces with minor transverse unevenness by following it profile. Owing to its construction, the plow can be inclined by 5° to the right and to the left in relation to the hitch (Fig. 17), 5°...

  • Page 23: Detaching From Vehicle

    Truck Snow Plow Operator's Manual SnowPick 6.2. Detaching from vehicle To detach SnowPick plow from the vehicle: on the control panel, set the shield in position for pushing the snow (Fig. lower the shield on the ground, unfold support foot, disconnect all electrical wires, remove cotter and lock bolt (Fig.

  • Page 24: Lubrication

    Truck Snow Plow Operator's Manual SnowPick 8. LUBRICATION The below listed points should be greased with ŁT-43 grease each time before snow removal season and before the machine storage period. During the season make sure to repeat lubrication once every 50 working hours. Before lubricating clean the points of any contamination and remains of the previously applied grease.

  • Page 25: Risks Present When Lubricating

    Truck Snow Plow Operator's Manual SnowPick To replace oil in electric pump do the following: loosen screws (S) (Fig. 20), slide out electric pump, place tank for waste oil and screw the cap (K), after draining of waste oil is complete reinstall the cap (K), refill oil and check for tightness, screw electric pump to the machine.

  • Page 26: Repair And Withdrawal From Use

    Truck Snow Plow Operator's Manual SnowPick 7. Harness connectors and terminals are free from corrosion ensuring good connections and are covered with dielectric grease, 8. Hydraulic tank is filled to a required level with oil, if on the snow plow the lifting cylinder is retracted.

  • Page 27: Disassembly And Withdrawal From Use

    Truck Snow Plow Operator's Manual SnowPick 11.2. Disassembly and withdrawal from use IMPORTANT When mounting and dismounting, please bear in mind personal protective equipment and environmental protection means. If the plow cannot be repaired any more, it should be withdrawn from use. Thus thoroughly clean and wash the machine.

  • Page 28: Wiring Diagrams

    Truck Snow Plow Operator's Manual SnowPick 12. WIRING DIAGRAMS Fig. 21. Control wiring diagram - 26 -...

  • Page 29: Warranty Card

    3. Faults or damages should be submitted personally, in writing or by telephone. Repairs shall be carried out within 14 days. Any repairs under the warranty should be carried out by authorized SaMASZ service facilities. 4. Warranty claims regarding the product replacement or repayment are considered within 14 days by the manufacturer.
  • Page 30 The Manufacturer reserves the right to introduce design changes. NOTE The SaMASZ company is constantly working on the development of all of its machine types and models. Therefore, any modifications of our machinery due to their form, equipment and technology are likely. No claims can arise from data, drawings and descriptions included herein as well as the spare parts list.

  • Page 31: Warranty Repairs Record

    Truck Snow Plow Operator's Manual SnowPick 14.1. Warranty repairs record Repairs description and replaced spare parts: Date, stamp and signature of repair shop. Date, stamp and signature of repair shop. Date, stamp and signature of repair shop. - 29 -...

This manual is also suitable for:

Snowpick 96Snowpick 114Snowpick 102

Table of Contents