City Up Plow Control; Transport And Parking Position Of The Plow - SaMASZ City 150 Operating Manual

In order to extend life of coils on electric valves the driver automatically switches to position (5).
Double pushing of buttons (2), (3) or (4) will switch to position (5).

5.3.3. City Up plow control

City Up plows are machines, which have their own lifting assembly.
Controlling City Up plow is possible owing to control panel (Fig. 14).
Switch (A) in position (I) enables controlling right shield, in position (II) – controling left shield. In
order to turn parking lights on set switch (B) in position (I). Turning road lights on is possible if switch
(C) is in position (II), while for dipped lights in position (I). Both dipped and road lights work if
parking lights ar first turned on – switch (B). If control light (D) is on then fuse is off.

5.4. Transport and parking position of the plow

During plow transport it should be lifted and prevented from lowering on its own (ex. locking
the tractor's TPH). When standing the plow mounted on the tractor should have the plowshare resting
on the ground. Plow not connected to the tractor's TPH should be resting on the support foot. In all
positions mentioned above the plow should be in the retracted position meaning with the actuators
retracted (Fig. 15).
a)
Fig. 15. The City plow: a) parking position, b) transport position
Operating manual
II
C
0
I
I
II
Fig. 14 . Control panel – City Up
Tractor mounted snow plow
City, City K, City Up
I
B
0
A
D
b)
- 13 -