Mounting City Up Plows On A Truck/Tractor - SaMASZ City 150 Operating Manual

− for triangular mount cat. municipal,
− for triangular mount cat. 0,
− for triangular mount cat. I,
− for custom mounting,
− plate for custom mounting,
City K snow plows are not adjusted to mounting frames - they are equipped with special
municipal linkage,
City Up plows are suitable for mounting on front linkage PN-EN 15432 Type B (DIN 76060),
the tractor must have a 12 V power outlet (cigarette lighter outlet),
the tractor must have at least one pair of hydraulic connections.
Fig. 9. Mounting the City plow on the three point hitch (A – pins with cotter pins, B – hydraulic connector,
C – support foot, D – electrical outlet, E – lower lifting arms of the tractor, F – upper tie,
In order to mount the plow on the tractor approach the plow so that the lower lifting arms of
the three point hitch are inserted into the mountings of the plow's suspension. Secure the mounting
using pins and cotter pins. Connect the upper part of the suspension system using a regulated tie and
secure them with a pin and cotter pin (Fig. 9). Next, connect the hydraulic connections and the power
plug along with the control switch. The rotation axis of the moldboards should be perpendicular to
the ground. After lifting the plow the support foot should be lifted and secured with a pin. If the plow
has been equipped with support wheels or skids they should be adjusted to the correct height.
ATTENTION!
The manufacturer is not responsible for damages to the device resulting from
improper mounting of the plow on the TPH of the tractor. During operation
periodically check weather the plow is still properly mounted.

5.2. Mounting City Up plows on a truck/tractor

In order to mount City Up plow on truck/tractor the following should be performed (Fig. 10):
install control panel,
plug in power plug to lighter's connector,
connect hydraulic hoses to vehicle, 4 connectors (2x2 pairs),
it is recommended to retract both cylinders responsible for shields' shifting (item. V) in order to
provide the plow's better stability,
catch can be lifted up onto a desired mounting height by means of vehicle's hydraulics,
set the vehicle in position which enables plow to be mounted on, so that hitch holders are above
linkage connectors,
Operating manual
D
90°
C
G
G – rotation axis of moldboards)
Tractor mounted snow plow
City, City K, City Up
F
A E B
- 10 -