Control The Service; Stopping The Service; Windows; Linux - NCR RealPOS 5977 User Manual

9-155

Control the Service

The configuration settings of the device are automatically activated in the background
upon terminal start–up.

Stopping the Service

To stop the service from running automatically, perform the following steps.
Note: The change of start–up type takes effect upon system reboot.

Windows

1. From the Start menu, select Control Panel→Performance and
2. From the services list, select NCR5976LDServiceSupport.
3. To set the start–up type, select either of the settings:
4. Select Apply.
5. Select OK.

Linux

1. Open a terminal and enter chkconfig ––del NCR5976LDServiceSupport.
2. Press Enter.
Maintenance→Administrative Tools→Services.
• Manual
• Disable
Service Support Utility