Graco HVLP Series Operation, Parts page 19

2. Connect clear air hose to compressor
outlet and remote cup air inlet.
ti30896a
3. Connect 5 ft (1.5 m) fluid hose to remote
cup fluid outlet and gun fluid inlet.
NOTE: Gun must be setup for use with
remote cup.
ti30897a
3A5085C
4. Connect air hose (V) to inlet fitting of gun.
ti30898a
NOTICE
If remote cup is accidentally tipped over or
held at too great of an angle, fluid may leak
into air regulator and cause damage. Take
precautions to avoid this. If fluid gets into
regulator, clean immediately.
5. You are now ready to spray. Reference
Startup, page 14, and HVLP Edge II
gun manual, provided with sprayer, for
spraying instructions.
Startup
19