Installation
Connect the unit directly to the main power distribution box.
Ask your vehicle manufacturer for the specifications of the main power
distribution box.
Route the power supply lead as illustrated (fig. a):
➤ Run the wiring loom to the main power distribution box along a route
where it is protected.
➤ Connect the negative lead (black) for the power supply.
➤ Connect the negative lead (black) for the voltage monitor.
➤ Connect the positive lead (red) for the power supply via a 40 A fuse.
➤ Connect the positive lead (red) for the voltage monitor via a 2 A fuse.
➤ Connect the wiring loom to the unit and fix with a cable tie in a suitable
position (fig. a 2.).
7.8
Fixing the surround
The outlet unit should be flush with the surround when installed (fig. b).
➤ Trim the surround to fit the vehicle.
A
NOTICE!
Tighten the screws carefully in order not to damage the surround.
➤ Fix the surround in place as illustrated (fig. b).
12
CoolAir RTX1000, RTX2000
EN