Oracle F320 User Manual page 48

Replace Oracle F320 Flash Card (Server Power-On)
If necessary, make a note of where the PCIe cards are installed.
■
5. Remove the carrier from the server slot.
6. Carefully remove the Oracle F320 Flash Card from the carrier.
a. Press the green tab to unlock the carrier latch and open the top of the PCIe
carrier.
Slide the card from the slot.
b.
Caution -
carrier slot or components on the PCIe carrier circuit board.
Place the card on an antistatic mat.
7.
See "ESD Safety Measures" on page 26
8. Locate the PCIe slot in the carrier for the card you are replacing.
If necessary, remove the PCIe filler panel from the slot.
9. Insert the replacement card in the supported PCIe slot in the carrier.
a. Remove the blank bracket panel on the carrier that aligns with the empty
PCIe slot (optional).
Save the bracket screw, if applicable.
b. Press down gently, but firmly, to properly seat the card in the slot.
Secure the card bracket to the carrier.
10.
Note -
does not accept mounting screws.
Engage the server retention mechanism to secure the card to the carrier.
48 Oracle Flash Accelerator F320 PCIe Card User Guide • July 2016
Avoid twisting, tilting, or pulling unevenly on the PCIe card, which could damage the
If the PCIe card includes a mounting screw, do not use the mounting screw. The carrier