Oracle F320 User Manual page 45

The following figure shows how to insert the card in a PCI Express slot:
Your server chassis might contain a card riser or other configuration. Refer to the servers
service manual for card installation instructions.
10. Secure the card bracket to the server chassis.
Engage the server retention mechanism to secure the card to the server chassis.
Or: Install the bracket screw, as required.
11. Return the server to service.
Refer to the servers service manual.
a. Replace the cover.
Your server chassis might use another configuration. Refer to the servers service manual
for instructions.
b. Reconnect the power cord and any network cables.
c. Power on the system.
The card hardware insertion is complete.
Configure the Oracle F320 Flash Card and verify drive availability.
12.
Follow the servers service manual instructions for Oracle F320 Flash Card NVMe storage
■
drive configuration and identification.
Use appropriate software commands to return the system to an operational state:
■
Power on the Oracle F320 Flash Card as required.
■
Attach a device driver as required.
■
Replace Oracle F320 Flash Card (Server Power-Off)
Servicing the Oracle F320 Flash Card 45