Table of Contents
Advertisement
Replace Oracle F320 Flash Card (Server Power-Off)
Carefully lift the card out of the PCIe slot to remove the card.
Caution -
touched.
Note -
PCIe filler panel. Installing PCIe filler panels in vacant PCIe slots helps reduce the level of
electromagnetic interference (EMI) emitted by the server.
Place the PCIe card on an antistatic mat.
7.
Locate the proper PCIe slot for the card you are replacing.
8.
If necessary, remove the PCIe filler panel from the slot.
9.
Insert the replacement card in the supported PCIe slot.
Your server chassis might require a PCIe carrier extension for each installed Oracle Flash
Accelerator F320 PCIe Card to facilitate air flow. Your server chassis might contain a card riser
or other configuration. Refer to the servers service manual for card installation instructions.
a.
Remove the blank bracket panel on the server chassis that aligns with the
empty PCIe slot.
Save the bracket screw, if applicable.
b.
Press down gently, but firmly, to properly seat the card in the slot.
44
Oracle Flash Accelerator F320 PCIe Card User Guide • July 2016
Hot surface. Avoid contact. Surfaces are hot and might cause personal injury if
Whenever you remove a PCIe card, you should replace it with another PCIe card or a
Advertisement
Table of Contents
