Table of Contents
Advertisement
The green latch should click into place. If the top is difficult to close, verify that the notch
of the card bracket or filler panel fits around the guide post.
8.
Insert the carrier into the server chassis.
9.
Return the server to service.
Refer to the servers service manual.
10.
Configure the server for the new Oracle F320 Flash Card.
a.
If applicable, perform any required commands for your system to install the
device driver for the new Oracle F320 Flash Card.
If applicable, perform any required commands for your system to recognize
b.
the new Oracle F320 Flash Card.
Verify successful installation of the Oracle F320 Flash Card through your
c.
systems OS.
Upon completed installation, the Oracle Flash Accelerator F320 PCIe Card is visible to
your server operating system.
Configure the system to maximize flash technology.
d.
Refer to the servers administration guide.
Related Information
"Product Overview" on page 9
■
"Installation Overview" on page 31
■
"Oracle F320 Flash Card Service Overview" on page 39
■
Install a New Oracle F320 Flash Card (Server Power-On)
Installing the Oracle F320 Flash Card
37
Advertisement
Table of Contents
