Table of Contents
Advertisement
Install a New Oracle F320 Flash Card (Server Power-Off)
The following figure shows how to insert the Oracle F320 Flash Card in a PCI Express slot:
Note -
servers service manual for PCIe card installation instructions.
7.
Secure the card bracket to the server chassis.
Engage the server retention mechanism to secure the card to the server chassis.
or: Install the bracket screw, as required to secure the card to the server chassis.
8.
Return the server to service.
Refer to the servers service manual.
Replace the cover.
a.
b.
Reconnect the power cord and any network cables.
c.
Power on the system.
The card hardware insertion is complete.
Configure the server for the new Oracle F320 Flash Card.
9.
a.
If applicable, perform any required commands for your system to install the
device driver for the new Oracle F320 Flash Card.
b.
If applicable, perform any required commands for your system to recognize
the new Oracle F320 Flash Card.
34
Oracle Flash Accelerator F320 PCIe Card User Guide • July 2016
Your server chassis might contain a card carrier or other configuration. Refer to the
Advertisement
Table of Contents
