Oracle F320 User Manual page 43

a. Remove the server from active operation.
Possible data loss. Exceeding the maximum number of Oracle 3.2 TB NVMe PCIe
Caution -
Flash Cards or placing cards in unsupported slots results in host platform error reports and
shutdown.
b. Turn off the server.
Power down the system.
Disconnect all power cords from the server power supplies.
c.
d. Remove the cover from the chassis.
Your server chassis might use another configuration. Refer to the servers service manual
for instructions.
4. Identify the physical location of the Oracle F320 Flash Card that you want to
remove.
Your server chassis might require a PCIe carrier extension for each installed Oracle Flash
Accelerator F320 PCIe Card to facilitate air flow. Refer to the servers service manual for
instructions.
Refer to "Supported Hardware and Software" in Oracle Flash Accelerator F320 PCIe Card and
Oracle 3.2 TB NVMe SSD Product
5. Remove the bracket from the server chassis [1].
Remove the bracket screw.
Remove the card from the server chassis [2].
6.
Replace Oracle F320 Flash Card (Server Power-Off)
Notes.
Servicing the Oracle F320 Flash Card 43