Making Drinks With Milk; Filling And Attaching The Milk Container; Making Macchiato; Making Caffelatte - DeLonghi ESAM6620 Manual

Please note:
If during delivery you want to stop making milk
or coffee, press the CAPPUCCINO button.

Making macchiato

1. After attaching the milk container, position
the container pointer (B1) on 2 "LATTE
MACCHIATO" (fig. 22) printed on the milk
container lid.
2. Press the LATTE MACCHIATO button (fig.
23). The message "LATTE MACCHIATO
CONTAINER POINTER IN POSITION 2"
appears. After a few seconds, frothed milk
flows out of the milk spout into the cup
below. Milk delivery stops automatically and
coffee delivery begins.
Please note:
If during delivery you want to stop making milk
or coffee, press the LATTE MACCHIATO button.

Making caffelatte

1. After attaching the milk container, position
the container pointer on CAFFELATTE (fig.
24) printed on the milk container lid.
2. Press the CAFFELATTE button (fig. 25).
The message "CAFFELATTE CONTAINER
POINTER IN POSITION 3" appears. After a
few seconds, milk is delivered from the milk
spout into the cup below. Milk delivery stops
automatically and coffee delivery begins.
Please note:
If during delivery you want to stop making milk
or coffee, press the CAFFELATTE button.
Making frothed milk and hot milk (WITHOUT
COFFEE)
1. After attaching the milk container, position
the container pointer (B1) according to the
quantity of froth you require (pos. 3 caffelatte
= little froth; pos. 1 cappuccino = abundant
froth).
2. Press the CAPPUCCINO, LATTE MACCHIATO
or CAFFELATTE button twice (within 2
seconds).
Cleaning the milk container after use
Important: Danger of burns
When cleaning the internal tubes of the milk
container, a little hot water leaks out of the frothed
milk tube (B5). Avoid contact with splashes of
water.
When "PRESS CLEAN BUTTON" flashes on the
display (each time you use a milk function):
1. Leave the milk container in the machine (you
do not need to empty it);
2. Place a cup or other recipient under the
frothed milk spout.
3. Press the "CLEAN" button (fig. 26) and hold
it down for at least 8 seconds. The message
"CLEANING..." is displayed.
4. Remove the milk container and always clean
the nozzle with a sponge (fig. 27).
Please note:
refrigerator. The milk should not be left out
of the refrigerator for more than 15 minutes.
Programming the quantities of coffee and milk
in the cup
The appliance is set by default to deliver standard
quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk
spout.
2. Press the CAPPUCCINO button (fig. 21)
until the message "MILK FOR CAPPUCCINO
PROGRAM QUANTITY" is displayed.
3. Release the button. The appliance starts
delivering milk.
4. Once the required quantity of milk has
been delivered into the cup, press the
CAPPUCCINO button again.
5. After a few
starts delivering coffee into the cup and
the message "COFFEE FOR CAPPUCC.
PROGRAM QUANTITY" is displayed.
6. Once the required quantity of milk has
been delivered into the cup, press the
CAPPUCCINO button again. Coffee delivery
stops and "ready" appears on the display.
The machine is now reprogrammed with the new
quantities.
15
seconds, the appliance