Setting Auto-Start Time; Activating Auto-Start; Descale; Setting The Temperature - DeLonghi ESAM6620 Manual

Activating auto-start

SET button again and "AUTO-
START NO" is displayed.
the SET symbol flashing on the display) to
modify the function (the appliance displays
AUTO-START YES);
OK button to activate auto-start;
P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.
Please note:
When the auto-start time is set, the
appears alongside the time on the display.

Descale

For instructions on descaling, see page 18.

Setting the temperature

To modify the temperature (low, medium, high)
of the water used to make the coffee, proceed
as follows:
P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "TEMPERATURE High...".
button (corresponding to the
SET symbol flashing on the display) until
the appliance displays the required coffee
temperature.
OK button to confirm the
temperature selected;
P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.

Auto-Off

The appliance is set to switch automatically to
stand-by if not used for an hour.
The time can be changed so that the appliance
switches off after 1, 2 or 3 hours.
P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "OFF AFTER 1 HOUR".
the SET symbol flashing on the display) to
button (corresponding to
to change other
lsymbol
to change other
button (corresponding to
change the number of hours the appliance
remains on.
ESC symbol flashing on the display) to exit
programming mode or
parameters.

Setting water hardness

For instructions on setting water hardness, see
37.

Default values (reset)

This resets all menu settings and programmed
quantities back to the default values (with the
symbol
exception of the language which remains as
set).
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "RESET NO"
SET symbol flashing on the display) and the
appliance will display "RESET YES";
values;
ESC symbol flashing on the display) to exit
programming mode or
parameters.
The appliance is now reset to the default settings
and the "READY" message is displayed.

Washing procedure

This function is available to customer services
personnel only.
Beep ON/OFF (activates and deactivates the
beep)
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "BEEP ON".
SET symbol flashing on the display) and the
symbol appliance will display "BEEP OFF"
ESC symbol flashing on the display) to exit
programming mode or
12
OK button to confirm.
P button (corresponding to the
to change other
P button, then press the
button (corresponding to the
OK button to reset the default
P button (corresponding to the
to change other
P button, then press the
button (corresponding to the
OK button to turn the beep off;
P button (corresponding to the
to change other
symbol
symbol