Pair Hearing Aids With Connectclip - oticon ConnectClip Instructions For Use Manual

Pair hearing aids with ConnectClip

1. Ensure ConnectClip is powered off
Press and hold multi button for about
6 seconds until power indicator OFF
2. Set hearing aids in pairing mode
Restart the hearing aids to activate pairing mode.
See how to turn hearing aids ON and OFF
in the hearing aid Instructions for use.
3. The hearing aids is ready
for connection with ConnectClip.
You have 3 minutes to complete the pairing.
4. Turn ON ConnectClip
Press and hold the multi button for about 3 seconds
until the power indicator is STEADY GREEN
14 About Start-up Functions Warnings More info
5. ConnectClip searches for
your hearing aids
Status indicator BLINKING YELLOW
6. Place ConnectClip and both
hearing aids close to each
other (max distance 20cms)
7. Connection established with
hearing aids, the status indicator
is STEADY YELLOW
20 cm
15