Use Connectclip As A Remote Control For Hearing Aids - oticon ConnectClip Instructions For Use Manual

Start/stop sound from remote microphone using your
hearing aids
IMPORTANT NOTICE
Please refer to your hearing aid's instructions for use for details on the functionality of
your specific hearing aid.
34 About Start-up Functions Warnings More info
P1 --> P2 --> TV --> Microphone
A press on the hearing aid push button will
change program in the hearing aids.
Once you reach the remote mirophone
program you will hear the remote microphone
program indicator.
To stop remote microphone sound change the
hearing aid program.

Use ConnectClip as a remote control for hearing aids

When ConnectClip is not streaming sound it becomes a remote control for your
hearing aids.
Volume up
- short press
Volume down
- short press
Note: Maximum distance between ConnectClip and hearing aids is 2 metres.
Next Program
Press and hold for
3 seconds for next program
Mute hearing aid
microphones - long
press
Unmute - short press on
volume up or down button
35