Technical Information - oticon ConnectClip Instructions For Use Manual

Technical information

Model AC1A
GTIN 05707131379382
ConnectClip contains a radio transceiver
using Bluetooth, Bluetooth Low Energy (BLE)
and a proprietary short range radio
technology both working at ISM band 2.4 GHz.
The GHz radio transmitters are weak and
always below 50mW equal to 17 dBm in total
radiated power. ConnectClip complies with
international standards concerning radio
transmitters, electromagnetic compatibility
and human exposure.
Due to the limited space available on
ConnectClip, relevant approval markings can
be found in this booklet.
44 About Start-up Functions Warnings
For body-worn operation, this device meets
FCC and IC RF exposure limits and has been
tested while in contact with the human body.
The device must not be co-located or used
in conjunction with any other antenna or
transmitter.
Additional information can be found in the
Technical data sheets (TD) on
www.oticon.global.
USA and Canada
This device contains a radio module with the
following certification ID numbers:
FCC ID: 2ACAHAC01
IC: 11936A-AC01
The device complies with Part 15 of the
FCC Rules and with Industry Canada's
licence-exempt RSSs.
More info
Operation is subject to the following two
conditions:
1. this device may not cause harmful
interference,
2. and this device must accept any
interference received, including
interference that may cause undesired
operation.
Note
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
45