Humminbird CoastMaster Chart Cards User Manual page 25

Adjust the Contour Offset during Navigation
SOLIX
1 . Tap Chart in the status bar .
2 . Select Go To > Contour Offset .
3 . Drag the slider, or press and hold the slider, to adjust the
offset .
To remove the offset, set the offset to 0 (off) .
Reverse Direction
SOLIX
1 . Tap Chart in the status bar .
2 . Select Go To > Reverse .
Cancel i-Pilot Navigation
Use the following instructions to cancel i-Pilot navigation .
SOLIX
1 . Tap Chart in the status bar .
2 . Select Go To > Cancel Navigation .
HELIX
1 . Press the MENU key once .
2 . Select Contour Offset
3 . Press the RIGHT or LEFT Cursor keys to adjust the offset .
4 . To remove the offset, set it to (0) zero .
HELIX
1 . Press the MENU key once .
2 . Select Reverse Direction
Menu .
HELIX
1 . Press the MENU key once .
2 . Select Cancel Navigation . Press the RIGHT Cursor key .
3 . Follow the on-screen prompts to cancel navigation .
25
from the Navigation X-Press Menu .
from the Navigation X-Press
Follow the Contour